
Drinking equipment
- Poultry nipples
- Poultry drip and drink cups
- Pressure regulators
- End air outlet sets
- I-Flush
- Flushing system kits
- Water control unit
- Anti-perch systems
- Suspension materials for drinking system
- Drinking system - accessories
- Poultry drinkers - automatic
- Poultry drinkers - manually operated
- Drinking systems for turkeys
I-Flow pressure regulator set with built-in flushing set (for parts see under heading regulation controls).
For mounting the pressure regulator at the drinking line, a connection set is needed. Connection sets I-Flow pressure regulator beginning of drinking line:
Article number | Description | |
---|---|---|
12.00.11002 | Stabilization tube 26.7 mm Ø, square nipple tubing 22 mm | |
12.00.11003 | Stabilization tube 33.7 mm Ø, square nipple tubing 22 mm | |
12.00.11005 | Stabilization tube 26.7 mm Ø, round nipple tubing 26.7 mm Ø | |
12.00.11006 | Stabilization tube 33.7 mm Ø, round nipple tubing 26.7 mm Ø | |
12.00.11007 | Aluminium profile, square nipple tubing 22 mm | |
12.00.11008 | Aluminium profile, round nipple tubing 26.7 mm Ø | |
12.00.12001 | Connection cage systems 22x22 mm |
Connection sets I-Flow pressure regulator middle of drinking line:
Article number | Description | |
---|---|---|
12.00.11052 | Stabilization tube 26.7 mm Ø, square nipple tubing 22 mm | |
12.00.11053 | Stabilization tube 33.7 mm Ø, square nipple tubing 22 mm | |
12.00.11055 | Stabilization tube 26.7 mm Ø, round nipple tubing 26.7 mm Ø | |
12.00.11056 | Stabilization tube 33.7 mm Ø, round nipple tubing 26.7 mm Ø | |
12.00.11057 | Aluminium profile, square nipple tubing 22 mm | |
12.00.11058 | Aluminium profile, round nipple tubing 26.7 mm Ø | |
12.00.12011 | Connection cage systems 22x22 mm |
Braukmann D06F pressure reducers for the reduction of water and non-agressive liquid pressure, compressed air and nitrogen. Including couplings; without manometer. Installed in horizontal piping with the filter bowl downward.
- Max. inlet pressure: 25 bar
- Outlet pressure: 1.5 - 6 bar
- Max. temperature: 40°C
Braukmann D06FN low pressure reducers for the reduction of water and non-agressive liquid pressure, compressed air and nitrogen. Including couplings; without manometer. Installed in horizontal piping with the filter bowl downward.
- Max. inlet pressure: 25 bar
- Outlet pressure: 0.5 - 2 bar
- Max. temperature: 70°C
Braukman FK06 filter combinations for water pressure reduction and filtering. Including couplings; without manometer. Installed in horizontal piping with the filter bowl downward.
- Max. inlet pressure: 16 bar
- Outlet pressure: 1.5 - 6 bar
- Max. temperature: 40°C
- Filter: 100 microns
Article number | Description | |
---|---|---|
![]() |
73.01.61110 | Filter 1/2" + 3/4" |
![]() |
73.01.61111 | Filter 1" |
![]() |
73.01.61112 | Filter holder with O-ring 1/2" + 3/4" |
![]() |
73.01.61113 | Filter holder with O-ring 1" |
![]() |
73.01.61114 | O-ring 1/2" + 3/4" |
![]() |
73.01.61115 | O-ring 1" |
![]() |
73.01.61118 | Repair set 1/2"+ 3/4", without filter |
![]() |
73.01.61119 | Repair set 1" + 5/4", without filter |
![]() |
73.01.61140 | AS06 filter 1/2" + 3/4" |
![]() |
73.01.61144 | KF06 filter set 1/2"+ 3/4" |
![]() |
73.01.61150 | AS06 filter 1" + 5/4" |
![]() |
73.01.61154 | KF06 filter set 1"+ 5/4" |
Manometers, black steel case . Working temperature -20ºC - 80ºC.
If the slope of the house floor is greater than 15 cm, a slope pressure regulator is necessary to control the water level.
Slope pressure regulator 22 x 22 mm, maximal flush pressure 2 bar (maximum of 3 per line).
The Maxiflo pressure regulator for simple, accurate and effective reduction of water pressure is designed for poultry watering systems. It is also suitable for low pressure pig drinking systems, except type 6001.
- Temperature: 1-40°C
- Inlet connection: 1/2" male thread
- Outlet connection: 3/4" male thread
- Max. inlet pressure: 20 bar
Article number | Description | |
---|---|---|
73.00.06001 | Type 6001: Inlet pressure 3 bar, max. 9 ltr per min. Outlet pressure 0.01-0.2 bar | |
73.00.06002 | Type 6002: Inlet pressure 3 bar, max. 34 ltr per min. Outlet pressure 0.05-0.6 bar | |
73.00.06003 | Type 6003: Inlet pressure 3 bar, max. 40 ltr per min. Outlet pressure 0.12-0.9 bar | |
73.00.06012 | Type 6012: Inlet pressure 3 bar, max. 40 ltr per min. Outlet pressure 0.5-1.2 bar |
Article number | Description | |
---|---|---|
![]() |
73.01.00100 | Locking nut |
![]() |
73.01.02000 | Top shell |
![]() |
73.01.02020 | Shell outlet 3/4" male thread |
![]() |
73.01.03000 | Outlet tube |
![]() |
73.01.04000 | Graphite washer |
![]() |
73.01.01000 | Jumper washer for types 6003 and 6012, white |
![]() |
73.01.05000 | Stainless steel screw |
![]() |
73.01.06000 | Jumper valve guide |
![]() |
73.01.08000 | Jumper valve |
![]() |
73.01.09000 | Jumper washer for types 6001 and 6002, green |
![]() |
73.01.01100 | Retaining ring |
![]() |
73.01.01201 | Diaphragm for type 6001 |
![]() |
73.01.01202 | Diaphragm for types 6002, 6003 and 6012 |
![]() |
73.01.01300 | Backing plate |
![]() |
73.01.07000 | Jumper carrier |
![]() |
73.01.01400 | Bottom shell for types 6003 and 6012 |
![]() |
73.01.01401 | Bottom shell for types 6001 and 6002 |
![]() |
73.01.01600 | Thrust plate for type 6001, stainless steel |
![]() |
73.01.01700 | Thrust plate for types 6002, 6003 and 6012, plastic |
![]() |
73.01.05000 | Body screw |
![]() |
73.01.01801 | Spring for type 6001 |
![]() |
73.01.01802 | Spring for type 6002 |
![]() |
73.01.01803 | Spring for type 6003 |
![]() |
73.01.01812 | Spring for type 6012 |
![]() |
73.01.01900 | Adjustment nut |